| ZL40H WHEEL LOADER |
||
 |
ZL40H FEATURES |
|
|
||
 |
 |
 |
 |
 |
Technical Specifications:
| Item | ZL40H | |
| OVERALL DIMENSION | ||
| Length (with bucket on ground) | 285" | 7248mm |
| Width (to outside of wheels) | 101" | 2570mm |
| Bucket width | 105.7" | 2685mm |
| Height (to the top of the cab) | 133.5" | 3390mm |
| Wheel base | 121" | 3080mm |
| Tread | 80.7" | 2050mm |
| Min. ground clearance | 15.8" | 400mm |
| MAIN TECHNICAL SPECIFICATIONS | ||
| Rated load | 8,818lb | 4000Kg |
| Operating weight | 29,101lb | 13200Kg |
| Rated bucket capacity | 2.3m3 | |
| Maximum breakout force | 134kN | |
| Maximum dump clearance | 110.8" | 2815mm |
| Dump reach | 41.3" | 1050mm |
| Dump angle at any position | 45° | |
| Maximum turning radius | ||
| Outside of Bucket | 6300mm | |
| Outside of rear wheel | 5730mm | |
| Lifting time of bucket | ≤6.2sec. | |
| Lowering time of bucket | ≤3.8sec. | |
| Dumping time | ≤1.8sec. | |
| Traveling speed (Km/h) | 2 forward and 1 reverse | |
| 1st gear forward | 11 | |
| 2nd gear forward | 36 | |
| 1st gear reverse | 15 | |
| DIESEL ENGINE | ||
| Model | Cummins 6BTA5.9-C169 | |
| Type | Direct injection. Turbocharged. Liquid cooling | |
| Rated output | 169Hp | 126kW |
| Inter-bore of cylinder/stroke | 102mm | |
| Total exhaust of cylinder | 5.9L | |
| Model of starting motor | 42MT | |
| Power of starting motor | 7.5kW | |
| Voltage of starting motor | 24V | |
| Rated speed | 2100r/min | |
| Maximum torque | 651N.M | |
| Starting type | Electric | |
| Minimum specific fuel consumption | 213g/Kwh | |
| Net weight | 452kg | |
| OIL CAPACITY | ||
| Fuel (diesel) | 200L | |
| Engine lubricating oil | 20L | |
| Oil for converter and gear box | 45L | |
| Oil for hydraulic system | 150L | |
| Oil for driving axles | 36L | |
| TRANSMISSION SYSTEM | ||
| Torque Converter | ||
| Model | Changlin | |
| Type | 3-elements, double stage | |
| Torque ratio | 3.1 | |
| Cooling type | Pressure oil circulating | |
| Transmission Case | ||
| Model | Changlin | |
| Type | Power shift, spur gear constantly in mesh | |
| Gear shift position | 2 forward and 1 reverse gear | |
| Axle and Tire | ||
| Type of main reducer | Spiral bevel gear, single stage | |
| Gear ratio of main reducer | 3.889 | |
| Type of final reducer | Single stage planetary | |
| Gear out ratio of final reducer | 4.941 | |
| Gear ratio | 19.216 | |
| Size of tire | 17.5-25-12PR | |
| WORKING DEVICE HYDRAULIC SYSTEM | ||
| Model of oil pump | CBGj3140 | |
| System pressure | 180kgf/cm2 | |
| Model of distribution valve | Caterpillar | |
| Pilot valve | Caterpillar | |
| Dimension of lifting cylinder | 150X80X695mm | |
| Dimension of tilting cylinder | 180X90X468mm | |
| STEERING SYSTEM | ||
| Type | Middle articulated frame. Co-axis flow amp. Steering | |
| Model of steering pump | CBGj 2063/1010 | |
| Model of steering gear | BZZ1-E630C | |
| System pressure | 14Mpa | |
| Dimension of steering cylinder | 70X40X460mm | |
| BRAKE SYSTEM | ||
| Type of traveling brake | Assisted oil. 4 wheel brake | |
| Air pressure | 7-8kgf/cm2 | |
| Type of emergency brake | Automatic cutting air brake | |
| Type of parking brake | Inner expanding. Automatic boosting. Inner expanding | |